P2 Shell Roof (EW Beams)
Structure for shell roofs whose beams run east to west, designed for a low added load on the existing roof.
FERO design drawings. Photos of installed structures are on the project pages linked below.
P2 shell roof is the east to west beam version of the FERO shell roof range, for factories, warehouses and agricultural sheds with shell roofs. It is designed for the low load capacity of shell roofs and follows the beam direction. It is SS400 iron, hot-dip galvanized to ASTM A123 with a 90 micron coating, and is supplied galvanized only.
P2 Shell Roof (EW Beams) specifications
FERO P2 Shell Roof (EW Beams)
10 year warranty| Application | Shell roof with east to west beams |
|---|---|
| Material and grade | SS400 iron |
| Coating | Hot-dip galvanized to ASTM A123, 90 microns |
| Fasteners | Galvanized for the structure, SS304 for the modules |
| Inclination | 10 to 45 degrees, customizable |
| Design wind speed | 35 m/s (126 km/h), customizable |
| Warranty | Every FERO structure carries a 10 year warranty, galvanized iron and anodized aluminium alike. Galvanized iron is hot-dip coated to ASTM A123 at 90 microns, the basis of the warranty. Ask us for the written terms and we will send them with your quotation. |
Member sizes, spans and foundations are designed for each project. Not sure which structure fits your site? Read the guide to solar structure types.
Common questions
Which sites need the EW beams shell roof structure?
Industrial and warehouse roofs whose main beams run east to west. Matching the structure to the beam direction keeps the fixings aligned with the beams.
What material and coating are used?
SS400 iron, hot-dip galvanized to ASTM A123 with a 90 micron coating. Structure fasteners are galvanized and module fasteners are SS304.
Can the wind design be raised for exposed sites?
Yes. The standard basis is 35 m/s (126 km/h), and it is raised to suit exposed or coastal sites.
Related structures in this range
Your site assessment is free.
Your quote arrives in 48 hours.
Tell us your site location and monthly consumption. GFE's engineers will send a preliminary sizing and cost estimate within two business days.