Solar O&M & Asset Management
Field-side O&M that keeps plants producing, plus office-side asset management for reporting, compliance, and performance — without a large upfront hardware commitment.
Pay-as-you-go: onboarding fee + annual fee. Monitoring equipment GFE installs for the service stays under warranty for the contract life — you do not need to buy it first.
No upfront monitoring hardware purchase
O&M is offered on a pay-as-you-go basis — onboarding fee plus annual fee — not a large capital commitment. PV-DG controllers, weather stations, or other site equipment GFE installs to support the service remain under warranty for the life of the contract. The customer does not have to buy that hardware outright.
Availability targets
97–99.5%
C&I/rooftop to utility-scale industry ranges; premium O&M often aims for 99%+.
PR with structured O&M
78–84%
Vs 65–72% without structured maintenance — a 10–15 pt gap.
O&M cost context
0.5–1.5%
Typical contracts as a share of system CAPEX per year (industry benchmark).
Figures above are industry benchmarks unless otherwise stated — not GFE-specific SLA guarantees.
O&M: monitoring, testing, uptime
Continuous monitoring
NeoSphere flags anomalies as they appear — not only at the next scheduled visit — so underperformance is caught early.
IV curve & thermal diagnostics
IV curve tracing finds underperforming panels or strings; thermal imaging and thermal drone surveys catch hotspots and faulty connections.
Preventive maintenance & cleaning
Monthly visual checks, scheduled cleaning calibrated to soiling (often 3–4 cycles/year on dusty industrial sites), and quarterly electrical testing.
Corrective response
When a fault is confirmed, GFE can recommend the fix or execute it as a paid correction job. Built around an 80/20 preventive-to-reactive industry best-practice mix.
Testing and performance diagnostics — not just walkthroughs
NeoSphere monitors asset performance continuously and flags anomalies as they appear. On top of that, GFE uses IV curve tracing, thermal imaging, and thermal drone inspection for faster full-site coverage on larger installations — plus other diagnostic tools as the site calls for.
Once an issue is identified, GFE can hand you a clear recommendation or carry out the fix as a paid correction job. Your choice — not a one-size answer.
- NeoSphere continuous anomaly detection
- IV curve tracing for string/module underperformance
- Handheld and drone thermal imaging
- Cadence: monthly visual · quarterly electrical · annual review
Asset management: reporting, compliance, guarantees
Reporting & compliance
Monthly and annual performance reports, fault logs, maintenance records, and documentation that supports audits and lender/investor reporting.
Performance guarantees & PR tracking
Generation and Performance Ratio tracked against modelled expectations so yield gaps are visible and actionable.
Billing & commercial visibility
Where applicable, generation summaries and commercial reporting that tie plant output to the numbers your finance team actually needs.
Lifecycle asset care
Engineering reviews that keep a 25-year asset producing like one — not quietly losing yield to deferred maintenance.
Where GFE already operates plants
O&M and monitoring sit on top of GFE's commissioned EPC and automation portfolio. Named references below are live plants in that base — ask for an O&M scope on these or on sites GFE did not originally build.
5 MWp · Kohat
Kohat Textile Mill
Large industrial textile plant — continuous machine load where uptime and PR tracking matter year-round.
View project350 kWp · Islamabad
Haideri Beverages
C&I beverage site in GFE's EPC portfolio — typical profile for structured O&M after commissioning.
View project450 kWp · Sadiqabad
Al-Amin Flour Mill
High-dust milling environment — cleaning cadence and thermal diagnostics are core O&M drivers.
View project2 MWp · Peshawar
Northern Bottling Limited
Large bottling campus where generation reporting and fault response protect process uptime.
View project1 MWp · Lahore
Rashid Latif Hospital
Healthcare critical loads — monitoring and rapid corrective response, not walkthrough-only O&M.
View project350 kWp · Hyderabad
Indus Cold Storage
Cold storage where energy and temperature correlate — continuous monitoring catches drift early.
View projectCommon O&M questions
Do I need to buy monitoring equipment before signing up for O&M?
No. GFE's O&M is pay-as-you-go: an onboarding fee plus an annual fee. Any equipment we install to support the service — PV-DG controllers, weather stations, or whatever the site needs — is installed as part of the service, stays under warranty for the life of the contract, and does not require an upfront hardware purchase.
What uptime can I expect from a properly maintained system?
Industry benchmarks (not GFE-specific guarantees): utility-scale solar typically targets 98–99.5% availability; rooftop and C&I systems commonly sit at 97–99%; premium O&M contracts often aim for 99%+. A 1% drop in availability is roughly a 1% drop in revenue over a 25-year asset life.
How much does deferred maintenance actually cost me?
Systems without structured O&M typically run at 65–72% Performance Ratio (PR); well-maintained systems reach 78–84% — a real 10–15 percentage point gap attributable to maintenance alone. Globally, underperformance has been estimated at about USD 5,720 per MW per year (Raptor Maps 2025 Global Solar Report).
What does GFE actually monitor and test?
NeoSphere (NeoTAQ's AI analytics dashboard) monitors asset performance continuously and flags anomalies as they appear. Field diagnostics include IV curve tracing, thermal imaging, and thermal drone inspection on larger sites, plus other tools as the site requires. When an issue is found, GFE can either deliver a clear recommendation or carry out the fix as a paid correction job — your choice.
How often is maintenance scheduled?
The layered industry standard GFE's programme is built around: monthly visual inspections, quarterly electrical testing (IV curve tracing, thermographic scans), and annual comprehensive reviews. High-dust industrial sites — common across GFE's C&I base — typically need 3–4 cleaning cycles a year.
Your site assessment is free.
Your quote arrives in 48 hours.
Tell us your site location and monthly consumption — GFE's engineers will have a preliminary sizing and cost estimate to you within two business days.