Solar mounting structures for EPC contractors
FERO designs and fabricates structures for Green Fuel Energy's own plants and for third-party EPC contractors. Send site drawings, the capacity and the location. We return a design, a bill of quantities and fabrication drawings, then manufacture and deliver.
Send a structure requestWhat to send
- Roof or site drawings, or photos if drawings are not ready
- The capacity, and the module size and count
- The site location
- The wind zone or design wind speed the project requires, if known
- The roof type, or soil information for a ground mount, if known
What FERO returns
Design
Tilt, member sizes, spacing, connection details and foundation, set from the site, the wind exposure, the number of modules and the access needed for cleaning.
Bill of quantities
The members and fasteners for the structure, with their quantities.
Fabrication drawings
A drawing set the installer can build from.
Manufacture and delivery
Fabricated in our Lahore workshop and delivered to your site.
Structures we supply
Iron structures are hot-dip galvanized to ASTM A123 at 90 microns, and aluminium structures are anodized 6063 T5. The standard design wind speed is 35 m/s (126 km/h), customizable. Every FERO structure carries a 10 year warranty, galvanized iron and anodized aluminium alike. Galvanized iron is hot-dip coated to ASTM A123 at 90 microns, the basis of the warranty. Ask us for the written terms and we will send them with your quotation.
- Aluminium Solar Mounting StructuresFlat roof and ground, aluminium: L2 and L3 structures.
- Ground Mount Solar StructuresGround mount, iron: P2 pile driven, and P2 concrete pile for rocky or sandy soil where pile drivers are not suitable.
- Shell Roof Solar Mounting StructuresShell roof: P3 for north to south beams and P2 for east to west beams, built for the low load capacity of shell roofs.
- Elevated Shed Solar StructuresElevated shed, flat roof: P2 and P3, which lift the array above obstacles and cut shading losses.
- Aluminium Solar RailingAluminium railing: flush mounted structures for steel and corrugated roofs, in standing seam and non-standing seam versions.
- Custom Solar Mounting StructuresSolar gazebo with an east-west array over a usable space below, and tubewell structures for irrigation and pump systems.
- Solar Parking Shed StructuresParking shed: single side arm, double side arm and shed type.
Send a structure request
Share the drawings or photos, the capacity and the location. An engineer replies with a first design direction within two business days.
Drawings can follow by email after you send the form. Choosing a structure type? Read the guide to solar structure types.
Your site assessment is free.
Your quote arrives in 48 hours.
Tell us your site location and monthly consumption. GFE's engineers will send a preliminary sizing and cost estimate within two business days.