Aluminium Railing (Standing Seam)
Clamp-on aluminium railing for standing seam roofs. It holds the modules flush without drilling the roof sheet.
FERO design drawings. Photos of installed structures are on the project pages linked below.
The standing seam railing clamps onto the raised seam of a steel roof sheet, so the sheet is not drilled and stays watertight. The modules sit flush with the roof. It is aluminium 6063 T5, anodized, with SS304 fasteners, and the standard design wind speed is 35 m/s (126 km/h), customized per project.
Aluminium Railing (Standing Seam) specifications
FERO Aluminium Railing (Standing Seam)
10 year warranty| Application | Steel roof with a standing seam |
|---|---|
| Material and grade | Aluminium 6063 T5 |
| Coating | Anodized |
| Fasteners | SS304 |
| Inclination | Flush mounted |
| Design wind speed | 35 m/s (126 km/h), customizable |
| Warranty | Every FERO structure carries a 10 year warranty, galvanized iron and anodized aluminium alike. Galvanized iron is hot-dip coated to ASTM A123 at 90 microns, the basis of the warranty. Ask us for the written terms and we will send them with your quotation. |
Member sizes, spans and foundations are designed for each project. Not sure which structure fits your site? Read the guide to solar structure types.
Common questions
Does the standing seam railing pierce the roof?
No. It clamps to the standing seam profile, so the roof sheet is not drilled.
What wind design applies?
A standard basis of 35 m/s (126 km/h), customized to the design wind speed of the site like other FERO structures.
Can this be used on corrugated roofs?
No. Corrugated and similar profiles take the non standing seam railing.
Related structures in this range
Your site assessment is free.
Your quote arrives in 48 hours.
Tell us your site location and monthly consumption. GFE's engineers will send a preliminary sizing and cost estimate within two business days.